Found at: http://publish.ez.no/article/articleprint/11/

Regular Expressions explained

Publishing date: 30.10.2000 18:02

This article will give you an introduction to the world of regular expressions. I'll start off with explaining what regular expressions are and introduce it's syntax, then some examples with varying complexity and last a list of tools which use regular expressions.

Concept

A regular expression is a text pattern consisting of a combination of alphanumeric characters and special characters known as metacharacters. A close relative is in fact the wildcard expression which are often used in file management. The pattern is used to match against text strings. The result of a match is either successful or not, however when a match is successful not all of the pattern must match, this is explained later in the article.

You'll find that regular expressions are used in three different ways: Regular text match, search and replace and splitting. The latter is basicly the same as the reverse match ie. everything the regular expression did not match.

Regular expressions are often simply called regexps or RE, but for consistency I'll be referring to it with it's full name.

Due to the versatility of the regular expression it is widely used in text processing and parsing. UNIX users are probably familiar with them trough the use of the programs, grep, sed, awk and ed. Text editors such as (X)Emacs and vi also use them heavily. Probably the most known use of regular expressions are in the programming language Perl, you'll find that Perl sports the most advanced regular expression implementation to this day.

Usage

Now you're probably wondering why you should bother to learn regular expressions. Well if you're a normal computer user your benefits from using them are somewhat small, however if you're either a developer or a system administrator you'll find that knowing regular expressions will make your (professional)life so much better.

Developers can use them to parse text files, fix up code and other wonders. System administrators can use them to search trough logs, automate boring tasks and sniff the network traffic for unauthorized activity.

Actually I would go so far as to say it's a crime for a System Administrator not to have any knowledge of regular expressions.

Quantifiers

Before I start explaining the syntax you might want to jump to the last page to learn which programs you can use to test out the examples in this article.

The contents of an expression is, as explained earlier, a combination of alphanumeric characters and metacharacters. An alphanumeric character is either a letter from the alphabet

abc

or a number

Actually in the world of regular expressions any character which is not a metacharacter will match itself(often called literal characters), however a lot of the time you're mostly concerned with the alphanumeric characters. A very special character is the backslash \, this turns any metacharacters into literal characters, and alphanumeric characters into a sort of metacharacter or sequence. The metacharacters are:

\ | ( ) [  {  ^ $ * + ? . < >

With that said normal characters don't sound too interesting so lets jump to the our very first meta characters.

The punctuation mark, or dot, . needs explaining first since it often leads to confusion. This character will not, as many might think, match the punctuation in a line, it is instead a special meta character which matches any character. Using this were you wanted to find the end of the line or the decimal in a floating number will lead to strange results. As explained above, you need to backslashify it to get the literal meaning. For instance take this expression

1.23

will match the number 1.23 in a text as you might have guessed, but it will also match these next lines

1x23
1 23
1-23

to make the expression only match the floating number we change it to

1\.23

Remember this, it's very important. Now with that said we can get the show going.

Two heavily recurring metacharacters are

* and +

They are called quantifiers and tells the engine to look for several occurrences of a characters, the quantifier always precedes the character at hand. The * character matches zero or more occurrences of the character in a row, the + characters is similar but matches one or more.

So what if you decided to find words which had the character c in it you might be tempted to write:

c*

What might come as a surprise to you is that you will find an enormous amount of matches, even words with no c in it will match. How so you ask, well the answer is simple. Recall that the * character matches zero or more characters, well thats exactly what you did, zero characters.
You see in regular expressions you have the possibility to match what is called the empty string, which is simply a string with zero size. This empty string can actually be found in all texts, for instance the word:

go

contains three empty strings. They are contained at the position right before the g, in between the g and the o and after the o. And an empty string contains exactly one empty string. At first this might seem like a really silly thing to do but you'll learn later on how this is used in more complex expressions.

So with this knowledge we might want to change our expression to:

c+

and voila we get only words with c in them.

The next metacharacter you'll learn is:

This simply tells the engine to either match the character or not (zero or one). For instance the expression:

cows?

will match any of these lines:

cow
cows

These three metacharacters are simply a specialized scenario for the more generalized quantifier

{n,m}

the n and m are respectively the minimum and maximum size for the quantifier. For instance

{1,5}

means match one or up to five characters. You can also skip m to allow for infinite match:

{1,}

which matches one or more characters. This is exactly what the + characters does. So now you see the connection, * is equal to {0,}, + is equal to {1,} and ? is equal to {0,1}.
The last thing you can do with the quantifier is to also skip the comma,

{5}

which means to match 5 characters, no more no less.

Assertions

The next type of metacharacters are assertions, these will match if a given assertion is true. The first pair of assertions are

^ and $

which match the beginning of the line and the end of the line. Note that some regular expression implementations allows you to change their behavior so that they will instead match the beginning of the text and the end of the text. These assertions always match a zero length string, or in other words they match a position. For instance if you wrote this expression:

^The

it would match any line which began with the word The.

The next assertion characters match at the beginning and end of a word, they are:

< and >

they come in handy when you want to match a word precisely, for instance:

cow

would match any of the following words

cow
coward
cowage
cowboy
cowl

a small change to the expression:

and you'll only match the word cow in the text.

One last thing to be said is that all literal characters are in fact assertions themselves, the difference between them and the ones above is that literal ones has a size. So for cleanliness sake we only use the word assertions for those that are zero-width.

Groups and alternation

One thing you might have noticed when we explained quantifiers is that they only worked on the character to the left, since this pretty much limits our expressions I'll explain other uses for quantifiers. Quantifiers can also be used on metacharacters, using them on assertions is silly since they are zero-width and matching one, two, three or more of them doesn't do any good. However the grouping and sequence metacharacters are perfect for being quantified. Let's first start with grouping.

You can form groups, or subexpressions as they are frequently called, by using the begin and end parenthesis characters:

( and )

The ( starts the subexpression and the ) ends it. It is also possible to have one or more subexpressions inside a subexpressions. The subexpression will match if the contents match. So mixing this with quantifiers and assertions you can do:

( ?ho)+

which matches all of the following lines

ho
ho ho
ho ho ho
hohoho

Another use for the subexpressions are to extract a portion of the match if it matches, this is often used in conjunction with sequences which is discussed later.

You can also use the result of a subexpression for what is called a back reference. A back reference is given by using a backslashified digit, only a single non-zero digit, this leaves you with nine back references.
The back reference matches whatever the corresponding subexpression actually matched (except that {article_contents_1} matches a null character). To find the number of the subexpression count the left parentheses from the left.

The use for back references are somewhat limited, especially since you only have nine of them, but on some rare occasion you might need it. Note some regular expression implementations can use multi-digit numbers as long as they don't start with a 0.

Next is alternations which allows you to match on of many words, the alternation character is

a sample usage is:

Bill|Linus|Steve|Larry

would match either Bill, Linus, Steve or Larry, and mixing this with subexpressions and quantifiers we can do:

cow(ard|age|boy|l)?

which matches any of the following words but none other

cow
coward
cowage
cowboy
cowl

I mentioned earlier in the article that not all of the expression must match for the match to be successful, this can happen when you're using subexpressions together with alternations. For instance

((Donald|Dolly) Duck)|(Scrooge McDuck)

As you see only the left or right top subexpression will match, not both, this is sometimes handy when you want to run a complex pattern in one subexpression and if it fails try another one.

Sequences

Last we have sequences which defines sequences of characters which can match, sometimes you don't want match a word directly but rather something that resembles one. The sequence characters are

[ and ]

any characters put inside the sequence brackets are treated as a literal character, even metacharacters. The only special characters are the - which denotes character ranges and the ^ which is used to negate a sequence. The sequence is somewhat similar with alternation, the similarity is that only one of the items listed will match. For instance

[a-z]

will match any small characters which are in the English alphabet (a to z). Another common sequence is

[a-zA-Z0-9]

which matches any small or capital characters in the English alphabet as well as numbers. Sequences are also mixed with quantifiers and assertions to produce more elaborate searches. For instance

<[a-zA-Z]+>

matches all whole words. This will match

cow
Linus
regular
expression

but will not match

200
x-files
C++

Now what if you wanted to find anything but words, the expression

[^a-zA-Z0-9]+

would find any sequences of characters which does not contain the English alphabet or any numbers.

Some implementations of regular expressions allows you to use shorthand versions for commonly used sequences, they are:

\d, a digit [0-9]
\D, a non-digit [^0-9]
\w, a word (alphanumeric) [a-zA-Z0-9]
\W, a non-word [^a-zA-Z0-9]
\s, a whitespace [ \t\n\r\f]
\S, a non-whitespace [^ \t\n\r\f]

Wildcards

For people who has some knowledge with wildcards I'll give a brief explanation on how to convert them to regular expressions. After reading this article you probably have seen the similarities with wildcards. For instance

*.jpg

matches any text which end with .jpg. You can also specify brackets with characters, for instance

*.[ch]pp

matches any text which ends in .cpp or .hpp. Altogether very similar to regular expressions.

Converting the * operator

The * means match zero or more of anything in wildcards, as we learned we do this is regular expression with the punctuation mark and the * quantifier. This gives

.*

Also remember to convert any punctuation marks from wildcards to be backslashified.

Converting the ? operator

The ? means match any character but do match something, this is exactly what the punctuation mark does.

Converting the [] operator

The square bracket can be used untouched since they have the same meaning going from wildcards to regular expressions.

These leaves us with:
Replace any * characters with .*
Replace any ? characters with .
Leave square brackets as they are.
Replace any characters which are metacharacters with a backslashified variant.

Examples

*.jpg

would be converted to

.*\.jpg

ez*.[ch]pp

would be convert to

ez.*\.[ch]pp

or alternatively

ez.*\.(cpp|hpp)

Examples

To really get to know regular expressions I've left some commonly used expressions on this page. Study them, experiment and try to understand exactly what they are doing.

Email validity, will only match email addresses which are valid, for instance user@host.com

[a-z0-9_-]+(\.[a-z0-9_-]+)*@[a-z0-9_-]+(\.[a-z0-9_-]+)+

Email validity #2, matches email addresses with a name in front, for instance "Joe Doe "

("?[a-zA-Z]+"?[ \t]*)+\<[a-z0-9_-]+(\.[a-z0-9_-]+)*@[a-z0-9_-]+(\.[a-z0-9_-]+)+\>

Protocol validity, matches web based protocols such as htpp://, ftp:// or https://

[a-z]+://

C/C++ includes, matches valid include statements in C/C++ files.

^#include[ \t]+[<"][^>"]+[">]

C++ end of line comments

//.+$

C/C++ span line comments, it has one flaw, can you spot it?

/\*[^*]*\*/

Floating point numbers, matches simple floating point numbers of the kind 1.2 and 0.5

-?[0-9]+\.[0-9]+

Hexadecimal numbers, matches C/C++ style hex numbers, 0xcafebabe

0x[0-9a-fA-F]+

Utilities

There exists several utilities which uses regular expression. I'll leave a list of them with a short description:

grep

Grep searches named input files for lines containing a match to the given pattern. It can also be used to find files which contains a specific pattern, for instance:

grep -E "cow|vache" * >/dev/null && echo "Found a cow"

This is utility is rather common on Linux distributions, but if you don't have it you can grab a version on the GNU page

A small tip is to enable extended regular expressions with the options -E, if not a lot of the metacharacters explained in this article won't work.

sed

Sed is a stream editor. A stream editor is used to perform basic text transformations on an input stream.

This is utility is rather common on Linux distributions, but if you don't have it you can grab a version on the GNU page

gawk

Gawk is the GNU Project's implementation of the AWK programming language. It conforms to the definition of the language in the POSIX 1003.2 Command Language And Utilities Standard.

This is utility is rather common on Linux distributions, but if you don't have it you can grab a version on the GNU page

RegExplorer

RegExplorer is a visual regular expression explorer, it allows for writing regular expressions and visually see the matches, thus making regular expression much easier to write and maintain.

RegExplorer

You can grab a copy at the RegExplorer page.

Visual RegExp

This software will let you design your regexps by letting you type the expression and visualize its effect on a sample of your choice.

Visual RegExp

You can grab a copy at the Visual RegExp page.

Regexx

Regexx is a complete regular expressions C++ solution. It implements easy expression execution, global searching, replace with atom substitution, customized replaces, easy match and atom strings retrieving.

Grab a copy at it's homepage.

Regular expression related links:

Regular Expressions and NP-Completeness
Equivalence of Regular Expressions and Finite Automata
Perl Regular Expression Tutorial

| Back to normal page view |